Promag CON-485 Series Operations Instructions download pdf (Page 73)

Memo-Graph S 7 Procedure in operation

Endress+Hauser 73

• The user who presently has responsibility is displayed in normal operation in the screen's header.

If nobody is logged in and has responsibility, “Logged out” appears.

Changing password

• Select Function - Change password.

• Then select your ID and enter you current password (or the initialisation password obtained from

the administrator).

• Now enter your new password and confirm it by re-entering it.

Logging in user - Login

• Select Function - Login

• Enter your password. After entering it correctly, you are logged into the device.

7.2.2 Product selection (“Product” key)

Batches of different products that have to be monitored for product-specific limit values are often

produced on a system. With product selection, the device is informed which product is to be pro-

duced. It can monitor either channel-specific or product-specific limit values.

Note!

• A product can only be selected after a user has logged into the device and accepted responsibility

(see Logging in/out - “Login” key).

• Product-related limit value monitoring begins immediately after a batch start. If no product has

been selected, no limit values are monitored.

• The different products are specified in the device set-up together with the associated limit values

from the administrator. Alternatively, the device also works with channel-specific limit values

(see Set-up - Basic settings).

• A “Product” can, for example, also be CIP cleaning (with defined limit values).

• Product selection can also be carried out using digital inputs or using a serial interface.

• Before production of a new batch can be started, the previous batch must first be stopped.

Selecting product:

• Select the desired product before starting production (“Select” key).

Starting product production / batch:

• Press “Start” key and then enter password. This prevents somebody else from producing under

your name.

Stopping product production / batch:

• Press “Product” key and then “Stop”, enter password. This stops production and monitoring of

product-related limit value violation.

Checking limit value setting for the current product:

• Press “Product” key and then “Information”.

Recalibration:

• Press “Product” key, then “Recal.” and then “Change”. Now the correct value for the respective

channel can be entered. To deactivate the calibration again, press the “Reset” key

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 97 98

No comments

Promag CON-485 Series Operations Instructions Page 73